Sierra

Box Contents

Controls and Functions

Front and Top View

  1. Display panel
  2. On/Off button
  3. Volume up
  4. Volume down
  5. Select input source

Back View

6. AC in – Connect to power supply
7. HDMI in 2
8. HDMI in 1
9. HDMI Out (ARC)
10. AUX in
11. Optical in
12. USB in

Remote Control

  1. Power On/Off
  2. Pair
  3. Volume Up
  4. Previous/Back
  5. Volume Down
  6. Music
  7. Treble-Up
  8. Treble-Down
  9. Mute
  10. Input (ARC, HDMI 1, HDMI 2, Bluetooth, AUX, USB ,OPTICAL)
  11. Next/Skip
  12. Movie
  13. News
  14. Bass-Up
  15. Bass-Down
  16. 3D

Instructions Guide

Please note all (Ref.) refer to the Controls and Functions in the above diagrams.

Mode Indicator

Input Type Display Indicator
RCA The front display will show AUX.
AUX The front display will show AUX.
HDMI IN The front display will show HDMI 1, HDMI2.
HDMI OUT The front display will show HDMI ARC.
OPTICAL The front display will show OPTICAL.
USB The front display will show USB.
Bluetooth Ready The front display will show BLUETOOTH as flashing.
Bluetooth Connected BLUETOOTH will stop flashing and a connected BEEP will sound.
Dolby Atmos Connected The front display will scroll “Dolby Atmos” for 3 seconds.
Dolby Surround Connected The front display will scroll “Surround” for 3 seconds.

 

Connecting to the Mains Supply

Ensure that the power supply voltage is within the range of 110V -240V ~ 50Hz/60Hz. Any other voltage may cause damage to the unit.

The Sierra comes with a power adapter for the soundbar. Make sure to unwind the cable to its full length. Connect the plug to a mains socket by fully inserting the plug into the mains socket.

Connect the Adapter to the AC power port in the back of the soundbar (Ref.8).

The Display Panel will show ‘–‘ to indicate it has registered a power source and is on standby mode.

Press the ‘POWER’ button on the remote control (Ref.15) or press and hold the ‘POWER’ button for 3 seconds on the top of the soundbar (Ref.3) to turn the unit on or off.

Using the RCA Audio Cable

You will need a TV/audio source with RCA audio output sockets and an RCA to 3.5mm AUX cable (included).

Connect the RCA stereo audio cable to your TV’s stereo RCA (L/R) audio output sockets (for help on how to locate your TV’s audio output sockets, refer to your TV’s user manual).

Connect the 3.5mm AUX end of the cable to the side of the soundbar via the AUX IN port (Ref.12).

Press ‘INPUT’ on the remote control (Ref.24) or on the unit (Ref.6) until ‘AUX’ mode is selected.

Troubleshooting: If you are not receiving a picture, please ensure that the RCA cable is connected to ‘OUTPUT’ RCA ports on your TV.

If your TV does not have ‘OUTPUT’ RCA ports, please use an alternative connection method.

Using the HDMI Input

You will need a TV/audio source with an HDMI High Definition Multimedia Interface, plus an HDMI cable (not included).

Connect the HDMI cable from the HDMI input on the soundbar (Ref.9), (Ref.10) to the HDMI output on your TV (for help on how to locate your TV’s HDMI output, refer to your TV’s user manual).

Press the ‘INPUT’ button on the remote control (Ref.24) or the ‘SOURCE/MODE’ button on the top of the soundbar (Ref.6) until ‘HDMI1 OR HDMI2’ mode is selected. The display will show ‘HDMI1 or HDMI2’ (Ref.1).

Using the native controls on your connected device, ensure the audio settings are set to HDMI Audio.

Using the HDMI ARC Output

You will need a TV/audio source with an HDMI ARC High Definition Multimedia Interface, plus an HDMI cable (not included).

Connect the HDMI cable from the HDMI output on the soundbar (Ref.11) to the HDMI input on your TV (for help on how to locate your TV’S HDMI ARC input, refer to your TV’s user manual).

Press the ‘INPUT’ button on the remote control (Ref.24) or the ‘SOURCE/MODE’ button on the top of the soundbar (Ref.6) until ‘ARC’ mode is selected. The display will show ‘ARC’ (Ref.1).

Using the native controls on your connected device, ensure the audio settings are set to ARC or HDMI Audio.

Using the AUX/Line In Port

You will need an AUX source with an AUX audio output an AUX audio cable (not included).

Plug one end of a 3.5mm audio input cable into the LINE port on the side of the soundbar (Ref.12).

Plug the other end of the cable into the audio output/headphone output on your MP3 player or audio device.

Press the ‘INPUT’ button on the remote control (Ref.25) or the ‘SOURCE/MODE’ button on the top of the soundbar (Ref.6) to switch to ‘AUX’ mode. The Display will show’ AUX’ (Ref.1).

Using the Optical Input

You will need an audio source with an optical audio output and a digital optical audio cable (not included).

Connect the optical cable to the optical output on the audio source and to the OPTICAL port in the back of the soundbar (Ref.14).

Press the ‘INPUT’ button on the remote control (Ref.25) or the ‘SOURCE/MODE’ button on the top of the soundbar (Ref.6) to switch to ‘OPTICAL’ mode. The Display will show ‘OPTICAL’ (Ref.1).

How do I set the correct audio settings for Optical Mode?

When using the soundbar in Optical mode, or when using the soundbar with a streaming app you may experience sound issues if you have your audio settings set up incorrectly. Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio.

This setting can be found within your TV’s sound settings, most likely under ‘Additional Settings’ within the Sound menu, where you will find options for ‘PCM/Dolby Digital/DTS/DTS Neo 2:5’ (refer to your TV’s user manual for more info).

Using the USB Input

Connect your USB device to the USB port (Ref.14) on the back of the soundbar.

Press the ‘INPUT’ button on the remote control (Ref.25) or the ‘SOURCE/MODE’ button on the side of the soundbar (Ref.6) to switch to ‘USB’ mode. The Display Will show ‘USB’ (Ref.1).

Bluetooth Operation

Pairing a Bluetooth Device for the First Time

Press the ‘INPUT’ button on the remote control (Ref.25) or the ‘SOURCE/MODE’ button on the side of the soundbar (Ref.6) to switch to ‘BLUETOOTH’ mode. The Display Will show ‘BLUETOOTH ‘(Ref.1).

Using the native controls on your Bluetooth device, select the “Majority Sierra” when prompted to choose a Bluetooth device.

If you encounter issues at this stage, please refer to the user manual for your Bluetooth device for instructions on pairing and connecting Bluetooth devices.

When successfully paired and connected, a confirmation ‘BEEP’ will issue from the unit and the indicator display will show ‘BLUETOOTH’ (Ref.1). After the initial pairing, the unit will stay paired unless unpaired manually by the user, or until the device is reset.

To unpair, hold down the ‘PAIR’ button on the remote control for 3 seconds (Ref.16). You can now pair the soundbar with another Bluetooth device.

If your device should become unpaired or you find it is unable to connect, repeat the steps above.

Volume Control

To adjust the volume of the soundbar, press either the ‘Volume Up’ or Volume Down’ buttons on the remote control (Ref.17/Ref.19) or press and hold the ‘Volume Up’ or Volume Down’ buttons on the top of the soundbar (Ref.4/Ref.5).

Sound Effect Modes

To adjust the sound effect of the soundbar, press either the ‘MUSIC’(Ref. 20) ‘MOVIE’ (Ref. 26) ‘NEWS’ (Ref.27) ‘3D’ button (Ref.30) on the remote control.

Dolby Atmos

DOLBY ATMOS is only available in ‘HDMI IN’ and ‘HDMI OUT’ (ARC) mode. For the details of the connection, please refer to HDMI input and HDMI output.

When the Sierra receives Dolby Atmos signal the front display will scroll “Dolby Atmos/Dolby Surround”. This scrolling display is only temporary and will last for 3 seconds. This will happen at the start of the film or the studio intro.

If you never see this scrolling message you will need to follow the guidance below to achieve ‘Dolby Atmos’.

  • To play Dolby Atmos on the Sierra, the compatible device playing or streaming needs to be Atmos capable.
  • To use Dolby Atmos in HDMI 1 /HDMI 2 / HDMI ARC mode, your TV has to support Dolby Atmos output.
  • The UHD(Ultra-High-Definition)/Blu-ray player or TV must have the Digital output settings set to Bitstream, often labelled with references to ‘Cinema surround’ or ‘Dolby’. “The UHD/Blue-Ray disc must be Dolby Atmos-enabled”.
  • The TV may not be able to pass through the Atmos stream to the soundbar even though it is capable of processing Atmos itself. A workaround for this is to suggest a direct connection from the player to the soundbar. For example, if your TV or DVD player has 2 x HDMI outputs. 1 is labelled “Audio/Video”. You can connect this to the TV for the picture. The second connection is labelled “Audio only”. This can be connected directly to the Sierra. If the player output is set to bitstream then the Sierra will output Atmos and display Atmos when it first sees the stream.

Warranty

Register your Majority product within 30 days of purchase to activate your extended 3 Year Warranty. Gain access to all the benefits and lifetime technical support (see our Extended Warranty details for more info).

Specifications

Soundbar96 x 10.8 x 8.1 cm
Subwoofer30.6 x 19 x 37 cm
Power12V ~ 1A
Weight7.9 kg
SpeakersStereo
Sound VersionDolby Atmos
Support FilesMP3, FLAC, WAV, WMA
AUX In3.5 mm
RCA Input3.5 mm

Safety Info

IMPORTANT

Please read all instructions carefully before use.

WARNING

Risk of electric shock. Do not open.

  1. Read these instructions:
  2. Heed all warnings.
  3. Follow all instructions in the user manual.
  4. Do no clean the apparatus near or with water.
  5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  7. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  8. Only use attachments/accessories specified by the manufacturer.
  9. Unplug this apparatus during light storms or when unused for long periods of time.
  10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped.
  11. No naked flame sources, such as lit candles, should be placed on the apparatus.
  12. Dispose of used electrical products and batteries safely according to your local authority and regulations.

Addition Warnings

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.

Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main power completely, the power plug should be disconnected from the main socket outlet completely.

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Recycling Electrical Products

You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with.

Troubleshooting

If you are having issues with your product or require further assistance, please visit our Frequently Asked Questions (FAQs) page below.

Save as a PDF

Want to save the above instructions as a PDF? Here’s how:

1. In the top right corner of your browser, click the three dots to open the browser menu.

2. From the dropdown menu, choose “Print”.

3. The Print settings window will appear. Select the first dropdown menu beneath “Print.”

4. Change the selection to “Save as PDF.”

5. Click Save and wait for the “Save As” window to appear.

6. Name the file, select the file destination, and then click “Save.”

Sierra

Quick Links