NOTE: The clock will need to be reset if the power is interrupted or in the event of a power outage.”00:00″ will appear and start blinking on the LED display to notify you that the power was interrupted, and the clock will need to be reset. Please follow steps 1-7 above to reset the clock.

CHECKING THE CLOCK via REMOTE CONTROL ONLY

The unit will show current time in standby mode. To check the current time in Power ON mode, tap the CLOCK Button on remote control, the current time will show for 3 seconds and then return to the previous screen.

Alarm Operation

SETTING THE ALARM CLOCK

This feature allows the system to turn on automatically and wake you using a beeping alarm, the CD or the RADIO.

1. In standby mode, press and hold the ALARM Button in on remote

control, Hour digits of alarm clock start flashing. You can also tap the ALARM Button in to direct enter alarm time setting mode without waiting.

2. Press the 1• / 1 Button to set the hour and then press the ALARM Button in again to confirm, Minute digits will be flashing.

The PM INDICATOR “P” will light locate to the right of the Hour digits when the Hour digits selected are for PM time. The AM INDICATOR “A” will light when the Hour digits selected are for AM time.

3. Press the 1• / 1 Button to set the minute and then press the ALARM Button in again to confirm, alarm wake up source will appear in display.

4. Press the 1• / 1 Button to select wake to Beep (buzz) ,CD or and FM(RAD) then press the ALARM Button again to finish alarm setup.

1. If “Wake to CD” is selected but a CD is not inserted, the alarm will default to the Beeping Alarm automatically when the alarm wake time is reached.

• For ‘Wake to Radio”, the system will default to the last radio station listened to before switching off.

ACTIVE/DE-ACTIVE ALARM FUNCTION

1. To active ALARM, tap the “ALARM” Button inonce, the alarm icon” 0″ will shown on LED display.
2. To cancel ALARM function by tap again the “ALARM” Button inuntil the alarm icon “0 ” goes off.

Wake to Radio, CD or Beeping Alarm

• When the alarm time is reached, the CD, radio or beeping alarm will sound for the time you set then shut off and reset itself for the following day.
• To stop the alarm immediately after it sounds, press the (9 Button on main

or remote control once. It resets itself for the following day.

• To cancel the following day alarm, tap the ALARM Button once, ALARM icon”0 ” goes off

RADIO OPERATION

1. In Off (standby) mode, press the POWER/ STANDBY BUTTON (9 on top of the main unit or on the remote control to turn the unit ON.
2. Tap the MODE Button to select FM Radio The FM channel frequency shown on the LED Display to confirm what mode you are in.
3. To manually tune to a specific radio station, tap the 0 or •Button

on either main unit or TUNE+ or TUNE- Button on remote control repeatedly. Use the manual tuning method to tune in weaker stations that are bypassed during Automatic Tuning.

4. To automatically tune to the next available radio station, press and hold the ior 0.1 Button on main unit or TUNE+ or TUNE- Button on remote control for 1-2 seconds until frequency readout on the display begins to scan and then release the button. The tuner will stop scanning when it receives the next broadcasting station of adequate signal strength.
5. Press the volume control VOLUME+/- Button on main unit or remote control to adjust the volume to the desired level.

FM & FM-Stereo reception

– When listening to the FM radio, press the FM ST. Button on remote control or main unit to switch between stereo mode and mono mode. The FM stereo icon “ST” will appear on the display if unit is in stereo mode. It is preferable to receive the program in mono when you are receiving a weak station.

HINTS FOR BEST RECEPTION:

FM – For best FM reception, the FM lead wire antenna located on the back of the unit should be fully unwrapped and extended

Automatic tuning depends on the signal strength of the broadcasting station, so weak stations may be skipped. You can manually tune to find the weak stations if a station gets skipped. With strong signals, the tuner may stop before it reaches the actual broadcast frequency, so you may need to manually tune for the best reception.

PRESET RADIO STATIONS

1. Press the POWER/ STANDBY C) BUTTON on top of the main unit or on the remote control to turn on the unit.
2. If it is not in FM radio mode, tap the MODE Button to select FM radio mode.
3. Tune to the desired radio station either by “manually” or “automatically” tuning
4. Press and hold the PRESET/MEMORY Button on main unit or tap MEMORY Button on remote control, display will show memory preset number “P01” flashing and memory icon “PROG” showing in the LED display.
5. Tap the P+ or P- Button on remote control to select the preset number you want to assign the station to.
6. Tap the MEMORY Button on remote control to confirm the
7. Repeat above steps 4 – 6 to preset up to 30 FM stations.

RECALLING PRESET MEMORY CHANNELS

In radio mode, to recall the pre-set channels by

1, Pressing the PRESET/MEMORY BUTTON on main unit, then tap the 1•or •1 Button repeatedly to select the preset radio station you want.

2, Pressing P+ or P- Button on remote control repeatedly to select directly

SKIP AND SEARCH MODE

Button to go to the next track or go back to the beginning of the current track.

2. 2. During playback, press and hold the 1•or 1 Button to search within the current track with audible high speed playback.

FOLDER SELECTION

If you are playing an MP3 CD, press the FOLDER or     on remote control to select MP3 songs store in different folders.

CD/MP3 TRACK DIRECT ACCESS BUTTON (CD MODE ONLY)

By using the direct track access button, the desired track number on the current disc can be played

1. In CD play or pause mode, press the direct access button on the re-mote control to select the desired track, the number you pressed will show on LED display for 2 seconds and then changed to show track number and start to play automatically.

• The direct access button allows you to select up to track number 9 by one press. To select track number 1O or higher, use two or three buttons

For example, to choose track 13 in the disc,

• Press the “1” button
• Press the “3” button within 2 seconds.

To choose track 130 in the disc,

• Press the “1” button once.
• And then press the “3” button.
• Finally press the “O” All 3 buttons must be pressed within 2 seconds.

Notes:

1. A track number higher than the number of tracks on the disc cannot be
2. Direct access function is not available in Random play mode and CD stop mode.

CD/PLAY MODES

Press the REPEAT Button on remote control repeatedly to select different of play modes when CD or MP3 CD is playing

Repeat Playing

During playback press the REPEAT(“.) button once the display shows flashing “. This is Repeat One mode. The current track will be played repeatedly. Press the REPEAT (“.) button again the display shows”without flashing.

This is Repeat All mode. All tracks will be played repeatedly. Press the REPEAT (“.) button again to resume normal playback.

REPEAT FOLDER- Folder tracks will repeat continuously. Repeat Folder icon FOLDER shows in display.

Random Play

During playback press the random x button to play music in random order. The display will show ran press the random X button again to resume normal playback.

CD Playback Programming

This function allows the tracks to be played in a programmed sequence.

Program can only be set in STOP mode.

1. Tap the PRESET/MEMORY Button on main unit or MEMORY Button on remote control, display will show program track number “P0l” and memory icon “PROG” will be flashing in the LED display.
2. Use the ior •1 Button on main unit or remote control to select the desired track. The track number will be shown in display.
3. Tap the PRESET/MEMORY Button on main unit or MEMORY Button on remote control to store the selected track in the memory, the next program number will advance one (i.e.”P02″) in LED
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 32 Display will show “FULL” after 32 tracks have been programmed.
5. Tap the ►11 Button on main unit or remote control to start playing the CD or MP3 CD in the programmed sequence.
6. Press the REPEAT Button (“.)on remote control to select Repeat 1/AII if
7. To stop playing, press the STOP Button on main unit or remote
8. To cancel the program play, press the STOP Button on main unit or remote control twice, “PROG” icon disappears from display.

Bluetooth Operation

In Off (standby) mode, press the POWER/ STANDBY BUTTON on top of the

main unit or on the remote control to turn the unit ON and follow the directions below to connect via Bluetooth.

PAIRING (Linking) a BLUETOOTH ENABLED cell phone OR OTHER BLUETOOTH

ENABLED DEVICE to the Okcastle HIFl100

The never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the with your Bluetooth device.

1. In Off (standby) mode, press the POWER/ STANDBY BUTTON C) on top ofthe main unit or on the remote control to turn the unit ON.
2. Tap the MODE Button to select Bluetooth mode, “PAIRING” message running in LED display is in search mode
3. The has never been paired with a Bluetooth device before or cannot find

the last paired device, the running message “PAIRING” on LED will indicate the search mode. You need to follow the pairing instructions below to link your Bluetooth device.

• Turn on the Bluetooth function of your Bluetooth device and enable the
• Select” Okcastle HIFI100 “from the device list when it appears on your device screen.If required, enter the pass code “0000” to pair (link) the your device.

1. After successfully pairing (linking), display will change to show “BT AUDIO” steadily. You can begin playing music from your Bluetooth device wirelessly to the speaker.
2. S. After selecting your favorite song, press PLAY/PAUSE►/11Button on the unit or remote control to play or pause the song.
3. Press the volume control on main unit or remote control to adjust to the desired volume level.
4. Press or Button on main unit or remote control to skip to previous or next song.
5. If you want to pair another Bluetooth enabled device, press and hold the

BT PAIR Button on remote control or PAIRING button on main unit for 2 seconds or turn off the Bluetooth function of device currently paired then repeat step 3 above.

Auxiliary Operation

This unit features an auxiliary audio signal input jack for connecting external audio devices like MP3 players, Digital Audio Device and listen to them through the speakers of this unit.

1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.
2. Plug one end into the AUDIO IN JACK on main unit and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the unit and external audio
4. Tap the MODE Button to select AUX mode, “AUDIO IN” icon turns on, display shows the current time.
5. The volume level can now be controlled through the main Operate all other functions on the auxiliary device as usual.

EQ Presets

This unit provides 4 different EQ modes to enhance your listening experience. You can select the desired effect by pressing the EQ Button on remote control repeatedly at following sequence

CLASSIC¢  ROCK¢ POPS ¢ JAZZ¢  FLAT

Mute

• Press the MUTE Button on remote control to mute the sound output from the speaker temporarily.
• Press the MUTE Button again or VOLUME+/- Button to resume to normal speaker playback.

X-Bass Button

Press the X-BASS button on remote control if you want to enhance the bass when listening to the system, “X-BASS” icon will appear in display. Press the button again to turn off extra bass effect; “X-BASS” icon will disappear in display.

Sleep Operations

1. To activate the sleep timer, turn the unit on and tap the MODE button to select FM radio, CD, Bluetooth or listening to music via AUDIO IN
2. Tap the SLEEP button on remote control, the sleep time icon appears on the display.
3. Repeatedly tap the SLEEP button to select a sleep time. The unit will turn off after 10, 20, 30, 40, 50, 60, 70, 80 or 90 minutes. Wait for 5 seconds after your selection for the unit to confirm the selection, the unit will play for the selected length of time then automatically turn off.
4. To cancel the sleep timer, tap the SLEEP button repeatedly until timer shows “00”, the sleep time icon disappears on the display.
5. To turn the unit off before the selected length of time, press the STANDBY
6. C) button at any time

2.) If you are falling asleep to music from an external device connected to the AUX input, the sleep timer will shut off the power to this system but it will not turn off the external device.

Snooze Operations

SNOOZE FUNCTION

1. Should you wish to delay the alarm for 9 minutes you can activate the SNOOZE function.
2. When the alarm sounds, press the SNOOZE button to delay the alarm for 9 minutes.
3. After alarm off, the SNOOZE function will no longer